HFS-LP Series
Low-Profile Industrial Scale
Ultra-low-profile platform scale (as little as 35–65mm deck height) for constrained-height installations.
- Capacity range
- 1–2 T
- Category
- Industrial Floor Scales
- Technical details
- Available below
Manufacturing
Built, installed & supported by HMT
Compliance support
Calibration & Legal Metrology guidance
System ready
Automation, ticketing & ERP integration
01Overview
Where headroom or a ramp isn't practical, a low-profile scale keeps the deck within a few centimetres of floor level — trading some capacity headroom for a near-flush installation that needs minimal or no approach ramp.
02How it works
Trading deck height for near-flush installation
Getting a platform scale's deck down to 35–65mm off the floor means shortening the load cell and mounting hardware to a fraction of what a standard-height platform uses, which in turn generally means a lower rated capacity than the same footprint at standard height — the engineering trade-off is real, and the design deliberately accepts less capacity headroom in exchange for a deck that needs minimal or no ramp at all.
Compact load cell housings, precisely machined
Achieving that low deck height requires load cell housings and mounting brackets machined to tighter tolerances than a standard-height platform needs, since there's less vertical room to absorb any misalignment between mounting points — precision in the mounting hardware substitutes for the height margin a taller design would otherwise have.
Why the ramp becomes optional, not just shorter
At a deck height low enough — often just a few centimetres — the transition onto the platform can be gentle enough that many pallet jacks and hand trucks manage it without a formal ramp structure at all, which is the whole point of this design: fitting a working scale into a space too tight for even a standard low-profile scale's shallow ramp.
03Manufacturing & build quality
Low-profile scales use purpose-built, compact load cell assemblies machined to tighter dimensional tolerances than standard-height platform load cells, since the reduced deck height leaves less margin to absorb mounting-point misalignment. The deck itself is fabricated to the same structural welding and finishing standards as a standard floor scale, but with a frame designed around the shorter load cell housings from the outset rather than adapted from a taller design. Each unit is load-tested across its rated capacity on a level surface before the digital indicator is matched and the complete calibrated system ships.
04Problems it solves
Doorway and aisle height constraints
A standard-height platform scale, even with a shallow ramp, can be too tall to fit through a narrow doorway or a low clearance aisle — a 35–65mm deck fits spaces a standard low-profile design simply can't.
No room for a dedicated ramp structure
Where floor space is too tight for any approach ramp at all, the near-flush deck height removes the need for one in most cases.
Retrofitting weighing into an existing tight production line
Adding weighing capability into a line that wasn't designed with a scale in mind often means working within space that's already constrained by other equipment — the low-profile format is specifically suited to that kind of retrofit.
Height restrictions from existing racking or conveyor lines
Facilities with racking or conveyor infrastructure set at a fixed height sometimes can't accommodate a standard scale's deck-plus-ramp height without disrupting that infrastructure.
05Why it matters
Not every facility has the luxury of designing its floor plan around where a scale needs to go — more often, the scale has to fit into whatever space is actually available between existing equipment, doorways, and aisles that were laid out for other purposes. A low-profile scale exists specifically for those situations, trading some capacity headroom for the ability to install accurate weighing in a space that would otherwise force a compromise: either no scale at all, or one installed somewhere inconvenient enough that it doesn't actually get used.
06Salient features
- Deck height as low as 35–65mm depending on capacity
- Minimal or no approach ramp required
- Suited to tight warehouse aisles and doorways
07Specifications
| Model | Capacity (T) | Least Count | Platform Size (m) | Notes |
|---|---|---|---|---|
| HFS-LP-1000 | 1 | 0.2 kg | 1 x 1 | — |
| HFS-LP-2000 | 2 | 0.5 kg | 1.2 x 1.2 | — |
08Technical file
Need the full technical sheet?
Request drawings, model-specific details and project documentation from the HMT team. A downloadable product file will appear here once approved.
09Complete system
Plan beyond the deck.
A vehicle weighing point can combine the weighbridge with indicator, load cells, traffic management and H-Weigh software for an accountable end-to-end workflow.
08In the field
09Frequently asked
What capacity is available at this deck height?
Capacity is lower than an equivalent-footprint standard-height platform, since the shorter load cells have less structural headroom — confirm your actual maximum load requirement against the specific model's rated capacity before ordering.
Do we still need a ramp?
Often minimal or none at all at the lowest deck heights, though this depends on the specific equipment crossing it — a heavily laden pallet jack may still benefit from a very shallow transition edge even at 35–65mm.
What deck sizes are available?
Deck footprint is specified independently of the height reduction, so you can typically match the platform size to your pallet or load footprint the same way you would with a standard-height scale.
Can it be installed on an uneven floor?
Like any platform scale, it performs best on a level, prepared surface — the reduced height margin in this design makes floor levelness somewhat more important than it is for a standard-height platform, so check floor condition before installation.
How is maintenance handled with such a low deck?
Access panels or a removable deck section are typically part of the design specifically to allow maintenance access to the load cells and wiring despite the limited under-deck space.
10Industries this serves
Ready to spec a low-profile industrial scale?
Tell us the application — our team responds with model recommendations, not a generic brochure.